Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[SOLVED] v.Air - CO2 Monitor not recognised (CM1106)
#6
Hi Vladimir,
I had this sensor in the shelf several weeks and few days ago I decided to test somenthing with it.
It was working well until now.
I'm not sure what happened, but I believe since it was automatically updated to build20161217 it is not recognising CM1106.
Even I do factory reset several times, there is no sensor recognised (prop_set "cubic.co2.missing","present" does not help).
Here is my log:
Code:
Searching for v.Air Trying : COM3

Trying : COM4

Trying : COM5

Trying : COM6

Trying : COM7

.  .  . [´HlðJâ$]
[>ÁØ]
[@xà]
[i]
[ÿ]
. [DEBUG is: 1]
.  .  . [vESPrino v1.16 build20170122]

vESPrino found on : COM5
[IP address: 0.0.0.0
Chip ID: 115E5D]
[No I2C Devices found]
[--- Setup PLUGINS ---
WifiStuff
Scheduling command: crc40prop_list
Scheduling command: @nop
crc40prop_list
Scheduling command: prop_list
prop_list
---vESPrinoCFG_start---
stored.i2c=0xFFFFFFFFFFFFFFFF
cubic.co2.missing=missing
ds18b20.port=missing
has.sensors=none
isMigrated=1
rf.CO2=136
rf.PM25=137
rf.PM10=138
rf.TEMP=140
rf.HUM=141
rf.PRES=142
rf.GEN=143
wifi.ssid=[hidden]
wifi.p1=[hidden]
tsKey=XXXXXXXXX
send.interval=60
custom_url_arr0=#http://api.thingspeak.com/update?key=XXXXXXX&field1=%CO2%
debug=true
---vESPrinoCFG_end---
ready >
WebSocketServer]
[]
[Scheduling command: crc61nop 0
Scheduling command: @nop
crc61nop 0
Scheduling command: nop 0
nop 0
ready >
WebServer]
[PowerManager
GPIO]
[Servo
Annemometer]
[DestinationManager
TimerManager

--- Setup SENSORS ---]
[CM110x : 0
TEST : 0
SI7021 : 0
BME280 : 0
BMP085 : 0
PM2005 : 0
CDM7160 : 0
DS18B20 : 0
TSL2561 : 0
BH1750 : 0
APDS9960 : 0
Expected Sensors: none found:
if the device configuration is changed, trigger a Factory Reset to update sensors

--- Setup DESTINATIONS ---
CustomHTTP
SerialDump
MQTT
RFX10
Blynk]
[Heap At setup end: 33680
Device initialized.
Scheduling command: @sendNow
Check time from google

---Sending data---
CustomHTTPDest::process
Response Code: -13]
[CustomHTTP : 89ms
SerialDumpDest::process
IP    : 0.0.0.0
CHIPID    : 115E5D
RUNTIME    : 6
GMTTIME    : 43856607
RSSI    : 31
SerialDump : 123ms
MQTTDest::process]
[MQTT : 84ms
RFDest::process
RFX10 : 0ms
Blynk : 0ms]
[Heap : 33536
Scheduling command: fupd
fupd
ready >]
[Scheduling command: crc63prop_set "cubic.co2.missing","present"
Scheduling command: @nop
crc63prop_set "cubic.co2.missing","present"
Scheduling command: prop_set "cubic.co2.missing","present"
prop_set "cubic.co2.missing","present"]
[ready >]
[Scheduling command: @sendNow

---Sending data---
CustomHTTPDest::process
Response Code: -13]
[CustomHTTP : 88ms
SerialDumpDest::process
IP    : 0.0.0.0
CHIPID    : 115E5D
RUNTIME    : 68
GMTTIME    : 43919321
RSSI    : 31
SerialDump : 124ms
MQTTDest::process]
[MQTT : 85ms
RFDest::process
RFX10 : 0ms
Blynk : 0ms]
[Heap : 33536]
[Scheduling command: crc71nop
Scheduling command: @nop
crc71nop
Scheduling command: nop
ready >]
[Scheduling command: crc1Dcustom_url_clean
Scheduling command: @nop
crc1Dcustom_url_clean
Scheduling command: custom_url_clean
custom_url_clean]
[ready >]
[Scheduling command: crc16custom_url_add "0","#http://api.thingspeak.com/update?key=XXXXX&field1=%CO2%"
Scheduling command: @nop
crc16custom_url_add "0","#http://api.thingspeak.com/update?key=XXXX&field1=%CO2%"
Scheduling command: custom_url_add "0","#http://api.thingspeak.com/update?key=XXXX&field1=%CO2%"
custom_url_add "0","#http://api.thingspeak.com/update?key=XXXXX&field1=%CO2%"]
[ready >]
[Scheduling command: @sendNow

---Sending data---
CustomHTTPDest::process
Response Code: -13]
[CustomHTTP : 90ms
SerialDumpDest::process
IP    : 0.0.0.0
CHIPID    : 115E5D
RUNTIME    : 131
GMTTIME    : 43982011
RSSI    : 31
SerialDump : 125ms
MQTTDest::process]
[MQTT : 84ms
RFDest::process
RFX10 : 1ms
Blynk : 0ms]
[Heap : 33536]
[Scheduling command: crc74factory
Scheduling command: @nop
crc74factory
Scheduling command: factory
factory
Doing Factory Reset, and restarting...]
[SPIFFS configuration removed]
[wss_stop]
[R0°c(ªýì]
[vESPrino v1.16 build20170122
IP address: 0.0.0.0
Chip ID: 115E5D]
[No I2C Devices found
i2c bus storing: 0xFFFFFFFFFFFFFFFF]
[autoconfig]
[*WM: SET AP STA
*WM:
*WM: Configuring access point...
*WM: vAirMonitor_115E5D]
[*WM: AP IP address:
*WM: 192.168.4.1
*WM: HTTP server started
ready >]
[Device initialized.

---Sending data---
CustomHTTPDest::process
CustomHTTP : 34ms
SerialDumpDest::process
IP    : 0.0.0.0
CHIPID    : 115E5D
RUNTIME    : 9
GMTTIME    : 4294967295
RSSI    : 31
SerialDump : 125ms
MQTTDest::process]
[MQTT : 74ms
RFDest::process
RFX10 : 0ms
Blynk : 0ms
fupd
ready >]
[crc52static_ip ,,,,,
static_ip ,,,,,]
[ready >]
[crc44wifi "SkToVaanja2012","XXXXX"
wifi "SkToVaanja2012","XXXXX"]
[Connecting to: "SkToVaanja2012", "XXXXX"]
[Waiting for WiFi]
[.]
[.]
[.]
[.]
[IP address: 192.168.1.87 in 27431 ms
GOT IP]
[ledcolor seqcgcgcgn]
[restart
wss_stop]
[/RÜÔ!Êàd:U]
[vESPrino v1.16 build20170122
IP address: 0.0.0.0
Chip ID: 115E5D]
[No I2C Devices found]
[Expected Sensors: none found:
if the device configuration is changed, trigger a Factory Reset to update sensors]
[Device initialized.

Waiting for WiFi]
[.]
[.]
[.]
[.]
[.]
[IP address: 192.168.1.87 in 6477 ms
GOT IP]
[]
[---Sending data---
CustomHTTPDest::process
CustomHTTP : 37ms
SerialDumpDest::process
IP    : 0.0.0.0
CHIPID    : 115E5D
RUNTIME    : 1
GMTTIME    : 44100001
RSSI    : -66
SerialDump : 124ms
MQTTDest::process]
[MQTT : 77ms
RFDest::process
RFX10 : 0ms
Blynk : 0ms
wss_start


WebSockets Server started on wss://192.168.1.87:8266
Open http://config.vair-monitor.com to configure device online
ready >
fupd]
[fg: 20161217, fc: 0, bn:20170122
ready >]
[crc33!otah
otah
Will update from: http://anker-bg.com/vlast3k/vesprino/latest.bin
ledcolor red
ledbrg 80]
[.QÜ£!äüD:Uþ]
[ÿ]
[vESPrino v1.16 build20170122
IP address: 0.0.0.0
Chip ID: 115E5D]
[No I2C Devices found]
[Expected Sensors: none found:
if the device configuration is changed, trigger a Factory Reset to update sensors]
[Device initialized.

Waiting for WiFi]
[.]
[.]
[.]
[.]
[.]
[IP address: 192.168.1.87 in 14523 ms
GOT IP]
[]
[---Sending data---
CustomHTTPDest::process
CustomHTTP : 36ms
SerialDumpDest::process
IP    : 0.0.0.0
CHIPID    : 115E5D
RUNTIME    : 9
GMTTIME    : 44160001
RSSI    : -62
SerialDump : 124ms
MQTTDest::process]
[MQTT : 77ms
RFDest::process
RFX10 : 0ms
Blynk : 0ms
wss_start


WebSockets Server started on wss://192.168.1.87:8266
Open http://config.vair-monitor.com to configure device online
ready >
fupd]
[fg: 20161217, fc: 0, bn:20170122
ready >]
[crc55!factory
factory
Doing Factory Reset, and restarting...]
[SPIFFS configuration removed]
[wss_stop]
[/SÜ£¹†ÿd:Uþ]
[vESPrino v1.16 build20170122
IP address: 0.0.0.0
Chip ID: 115E5D]
[No I2C Devices found
i2c bus storing: 0xFFFFFFFFFFFFFFFF]
[autoconfig]
[*WM: SET AP STA
*WM:
*WM: Configuring access point...
*WM: vAirMonitor_115E5D]
[*WM: AP IP address:
*WM: 192.168.4.1
*WM: HTTP server started
ready >]
[Device initialized.

---Sending data---
CustomHTTPDest::process
CustomHTTP : 35ms
SerialDumpDest::process
IP    : 0.0.0.0
CHIPID    : 115E5D
RUNTIME    : 9
GMTTIME    : 4294967295
RSSI    : 31
SerialDump : 125ms
MQTTDest::process]
[MQTT : 74ms
RFDest::process
RFX10 : 0ms
Blynk : 0ms
fupd
ready >]
[crc0Einfo
info

vESPrino v1.16 build20170122
IP address: 0.0.0.0
Chip ID: 115E5D
ready >]
[crc52static_ip ,,,,,
static_ip ,,,,,]
[ready >]
[crc44wifi "SkToVaanja2012","XXXXX"
wifi "SkToVaanja2012","XXXXX"]
[Connecting to: "SkToVaanja2012", "XXXXX"]
[Waiting for WiFi]
[.]
[.]
[.]
[IP address: 192.168.1.87 in 78445 ms
GOT IP]
[ledcolor seqcgcgcgn]
[restart
wss_stop]
[R2° !Èþü˜]
[vESPrino v1.16 build20170122
IP address: 0.0.0.0
Chip ID: 115E5D]
[No I2C Devices found]
[Expected Sensors: none found:
if the device configuration is changed, trigger a Factory Reset to update sensors]
[Device initialized.

Waiting for WiFi]
[.]
[.]
[.]
[.]
[.]
[IP address: 192.168.1.87 in 6460 ms
GOT IP]
[]
[---Sending data---
CustomHTTPDest::process
CustomHTTP : 37ms
SerialDumpDest::process
IP    : 0.0.0.0
CHIPID    : 115E5D
RUNTIME    : 1
GMTTIME    : 44280001
RSSI    : -62
SerialDump : 123ms
MQTTDest::process]
[MQTT : 76ms
RFDest::process
RFX10 : 1ms
Blynk : 0ms
wss_start


WebSockets Server started on wss://192.168.1.87:8266
Open http://config.vair-monitor.com to configure device online
ready >
fupd]
[fg: 20161217, fc: 0, bn:20170122
ready >]
[---Sending data---
CustomHTTPDest::process
CustomHTTP : 38ms
SerialDumpDest::process
IP    : 192.168.1.87
CHIPID    : 115E5D
RUNTIME    : 129
GMTTIME    : 44400269
RSSI    : -60
SerialDump : 131ms
MQTTDest::process]
[MQTT : 77ms
RFDest::process
RFX10 : 0ms
Blynk : 0ms]
[---Sending data---
CustomHTTPDest::process
CustomHTTP : 41ms
SerialDumpDest::process
IP    : 192.168.1.87
CHIPID    : 115E5D
RUNTIME    : 250
GMTTIME    : 44520544
RSSI    : -62
SerialDump : 131ms
MQTTDest::process]
[MQTT : 78ms
RFDest::process
RFX10 : 1ms
Blynk : 0ms]
[Switched to power-safe mode. Press key during start or restart device to exit.
Completed in: 300427ms
Going into power-safe mode for 30 seconds]
[Ê$OPù¸ÿ]


How can I troubleshoot this situation? Any suggestion what to measure (pins on CM1106) to make sure it's HW or SW issue?

vThing - CO2 Monitor v1.15 (CM1106 NDIR+WIFI)
vAir Monitor (CDM7160 CO2 Sensor, BME280 - Temp/Hum/Press Sensor, RF433)
Reply


Messages In This Thread
RE: v.Air - CO2 Monitor not recognised - by admin - 01-25-2017, 06:39 PM
RE: v.Air - CO2 Monitor not recognised (CM1106) - by vaanja - 01-28-2017, 12:27 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)