11-21-2016, 10:17 PM
Thank you for the quick response!
The Chrome config tool is not connected: they're both being fed by USB wall chargers. Only one line is sent to domoticz (the combined temp/hum/pressure).
Following your post I've tried using an Anker 5000mah powerbank instead, but that didn't seem to matter much. Unfortunately my lab power supply is broken so I can't test that. Could the prevention of sleep mode be related to the data pins either being shorted or having a resistor between them perhaps (depending on charger/powerbank brand)?
Looking forward to the new box design and f/w update.
The Chrome config tool is not connected: they're both being fed by USB wall chargers. Only one line is sent to domoticz (the combined temp/hum/pressure).
Following your post I've tried using an Anker 5000mah powerbank instead, but that didn't seem to matter much. Unfortunately my lab power supply is broken so I can't test that. Could the prevention of sleep mode be related to the data pins either being shorted or having a resistor between them perhaps (depending on charger/powerbank brand)?
Looking forward to the new box design and f/w update.