Device stops sending data after a while

[admin]

(01-23-2017, 03:59 PM)alexei Wrote: after today's update I started having this problem - device stops sending data after a certain time after switching on.

can you enable debug mode, and then let it run
it will start blinking the led.. i will later explain what the blinking means
but in general - each sending cycle goes through
3 blue blinks - wifi connected
3 green blinks - data sent
or
3 red blinks - sending failed
or 3 red/blue blinks - wifi connection failed
or 3 red/lila = i2c issues
or 3 red/yellow = other types of i2c issues

there may be some othres but those are the main ones
please connect it and once it stops sending , tell me what are the blinks

thanks!
i wll also post how to revert to the previous fw a bit later