02-17-2017, 02:09 AM
Can you try to enable debug via the config tool (in settings)
and then connect it to the external power supply
the LED should then blink in different ways like described here
http://forum.vair-monitor.com/showthread...380#pid380
also - when it stops broadcasting, can you send me the logs from the last iteration from the config tool
in general the led turns off after 5 mins of operation
and then connect it to the external power supply
the LED should then blink in different ways like described here
http://forum.vair-monitor.com/showthread...380#pid380
also - when it stops broadcasting, can you send me the logs from the last iteration from the config tool
in general the led turns off after 5 mins of operation