[SOLVED] Fried my monitor?

[freakstar]

Code:

Found i2c bus on SDA:SCL = D5:D1 (14:5)
ready >]
[Scheduling command: crc7Ccdmtest
Scheduling command: nop
crc7Ccdmtest
Scheduling command: cdmtest
PowerManager timeout: 0
P]
[owerManager disabled
cdmtest
rst is: 0
Register 0x00 : 0
Register 0x01 : 110
Register 0x02]
[: 10010
Register 0x03 : 0
Register 0x04 : 0
Register 0x07 :]
[1
Read CO2: Raw CO2: 0
Raw CO2: 0
Scheduling command: scani2c
-1
scani2c
Scanning SDA:SCA = D1:D5]
[No I2C devices found

Scanning SDA:SCA = D1:D7]
[No I2C devices found

Scanning SDA:SCA = D1:D6]
[No I2C devices found

Scanning SDA:SCA = D5:D1
I2C device found at address 0x69
I2C device found at address 0x76
I2C device found at address 0xE9
I2C device found at address 0xF6
done

Found i2c bus on SDA:SCL = D5:D1 (14:5)
ready >]
[Scheduling command: crc7Ccdmtest
Scheduling command: nop
crc7Ccdmtest
Scheduling command: cdmtest
PowerManager timeout: 0
PowerManager disabled
cdmtest
rst is: 0
Register 0x00 : 0
Register 0x01 : 110
Register 0x02]
[: 10010010
Register 0x03 : 33]
[0
Register 0x04 : 0
Register 0]
[x07 : 1
Read CO2: Raw CO2: 0
Raw CO2: 0
Scheduling command: scani2c
-1
scani2c
Scanning SDA:SCA = D1:D5]
[No I2C devices found

Scanning SDA:SCA = D1:D7]
[No I2C devices found

Scanning SDA:SCA = D1:D6]
[No I2C devices found

Scanning SDA:SCA = D5:D1
I2C device found at address 0x69
I2C device found at address 0x76
I2C device found at address 0xE9
I2C device found at address 0xF6
done

Found i2c bus on]
[SDA:SCL = D5:D1 (14:5)
ready >]
[Scheduling command: crc7Ccdmtest
Scheduling command: nop
crc7Ccdmtest
Scheduling command: cdmtest
PowerManager timeout: 0
PowerManager disabled
cdmtest
rst is: 0
Register 0x00 : 0
Register 0x01 : 110
Register 0x02 : 10010
Register 0x03 : 0
Register 0x04 : 0
Register 0x07 :]
[1
Read CO2: Raw CO2: 0
Raw CO2: 0
Scheduling command: scani2c
-1
scani2c
Scanning SDA:SCA = D1:D5]
[No I2C devices found

Scanning SDA:SCA = D1:D7]
[No I2C devices found

Scanning SDA:SCA = D1:D6]
[No I2C devices found

Scanning SDA:SCA = D5:D1
I2C device found at address 0x69
I2C device found at address 0x76]
[I2C device found at address 0xE9
I2C device found at address 0xF6
done

Found i2c bus on SDA:SCL = D5:D1 (14:5)
ready >]

I noticed it also stopped updating my Homeseer devices on a regular base, although it is configured at 120 secs?