+- vThings Forums (http://forum.vair-monitor.com)
+-- Forum: vThings (http://forum.vair-monitor.com/forumdisplay.php?fid=1)
+--- Forum: vAir Monitor (CO2, Dust, Tempereature, etc..) (http://forum.vair-monitor.com/forumdisplay.php?fid=2)
+--- Thread: [SOLVED] Fried my monitor? (/showthread.php?tid=36)
Pages:
1
2
[SOLVED] Fried my monitor? - freakstar - 12-15-2016
Connected the monitor to an USB power supply with 5.2 V, 2.1 A output. The LED lit up white (very bright) and now the monitor isn't sending data or recognized anymore on my computer.
Did I fry it?
RE: Fried my monitor? - admin - 12-15-2016
Hmmm was it original charger or some clone (sometimes they give out more)
Was it working well before ?
Recognized, you mean.. Serial port is not detected?
I will send you tomorrow a new main board for free
RE: Fried my monitor? - freakstar - 12-16-2016
Nice!
It is a kind of an original charger. I bought it for my Raspberry Pi 2, this needs a pretty steady supply. So I thought, maybe it works fine for the monitor also... Too bad it didn't.
Indeed it is not recognized as an device on my computer.
RE: Fried my monitor? - admin - 12-16-2016
i also believe i have one here fried, at least not responding as well. I just haven't yet found time to debug and see what happened to it... let's hope soon i will check it.
Unfortunately today when i went to the post i forgot to take your package
i will send it on monday
Sorry...
RE: Fried my monitor? - freakstar - 12-16-2016
No problem!
RE: Fried my monitor? - freakstar - 12-29-2016
Did you send it already?
RE: Fried my monitor? - admin - 12-30-2016
yeah.. i sent it last thursday or wednesday. i hope you will get it this week
RE: Fried my monitor? - freakstar - 01-01-2017
Yes, received it yesterday! Thanks, looks like it is working fine again.
Hm, CO2 isn't initializing?
Code:
--- DestHanlder: sendValue --- 0]
[Found BME280 - Temperature/Humidity/Pressure Sensor]
[BMP085 - init failed!
33]
[Raw CO2: 0
Raw CO2: 0
Scheduling command: scani2c]
[TSL2561 - init failed!]
[BH1750 - init failed!
Heap : 31816
scani2c
Scanning SDA:SCA = D1:D5]
[No I2C devices found
Scanning SDA:SCA = D1:D7]
[No I2C devices found
Scanning SDA:SCA = D1:D6]
[No I2C devices found
Scanning]
[SDA:SCA = D5:D1
I2C device found at address 0x69
I2C device found at address 0x76
I2C device found at address 0xE9
I2C device found at address 0xF6
doneRE: Fried my monitor? - admin - 01-03-2017
hmm, can you send me the log from the begin ?
RE: Fried my monitor? - freakstar - 01-15-2017