+- vThings Forums (http://forum.vair-monitor.com)
+-- Forum: vThings (http://forum.vair-monitor.com/forumdisplay.php?fid=1)
+--- Forum: vAir Monitor (CO2, Dust, Tempereature, etc..) (http://forum.vair-monitor.com/forumdisplay.php?fid=2)
+--- Thread: [SOLVED] LED Function (/showthread.php?tid=3)
Pages:
1
2
RE: [SOLVED] LED Function - admin - 03-08-2017
Don't worry
it is a fact that it is not working as intended.. i checked it last days on a CM1102-based sensor and it seemed to work, i have to check also on a CDM7160, where thefirmware goes to sleep regularily
also you need to have debug mode disabled for this to work
as for the brightness - go to vESPrino tab and there on the bottom of the settings is a "Brightness OVerride" setting, check if increasing it will help
and for the thresholds, currently the top is at 3500 ppm, i can make it configurable, so that if you set it to e.g. 2800, also the yellow part will be smaller
of course it can be much more complex, but.. step by step
RE: [SOLVED] LED Function - vbs - 03-09-2017
(03-08-2017, 03:13 AM)admin Wrote: as for the brightness - go to vESPrino tab and there on the bottom of the settings is a "Brightness OVerride" setting, check if increasing it will help
I tried that and at first it helps. The brightness changes accordingly (gets brighter) but after some time (I assume after the next off/on-cycle) the brightness falls back to normal. So it does not help permanently.
RE: [SOLVED] LED Function - admin - 03-09-2017
Aahhh
I will check this
RE: [SOLVED] LED Function - vbs - 03-29-2017
Are there any news on this topic?
RE: [SOLVED] LED Function - admin - 03-30-2017
yeah.. i got some time to test it this weekend, and found few bugs.. i will fix them in 1-2 days and send update
RE: [SOLVED] LED Function - vbs - 03-31-2017
Yay thats great, thanks a bunch!
RE: [SOLVED] LED Function - vbs - 04-24-2017
Me again
Is there any update yet? Would be great to have these LED issues fixed, thanks!
RE: [SOLVED] LED Function - admin - 04-26-2017
aaahhh
(Sorry!
i fixed it that weekend few weeks ago. Then i decided to test it a bit, and then forgot to tell you
just update to the latest firmware and it will be fine