RF Connectivity

[nethenic]

Hi,

Just received my vAir Monitor (CO2+DUST,+TEMP+PRESS+RF433), working good with Wifi, but no luck with RF.

I've updated my rfxtrx433e with latest firmware, updated my vAir monitor with latest firmware too (by linux shell, not working via chrome app) but I've never seen RFXMETER sensors in Domoticz (update done too here .
I've activated all the protocole/modes of rfxtrx433e and nothing too. I've rebooted, unplugged all the boxes (rfxcom, vAir, pc), and always nothing.
Is there something I forgot to activate inside Domoticz or rfx config ? (Oregon sensors have been immediatly detected)

Thank-you for your help by advance (and your vAir is just wonderful !)


This is what the logs say :

Code:

Searching for v.Air Trying : /dev/ttyUSB0

.  . [ÈdOp˜KRJÑø@xtIìû]
[„•…ÁHeap at start: 37392]
. [vESPrino v1.16 build20170103]

vESPrino found on : /dev/ttyUSB0
[(---
Neopixel
DweetIO
crc61nop 0
nop 0
ready >
WebServer
WebSocketServer
PowerManager
GPIO
Servo
Annemometer]
[TimerManager

--- Setup SENSORS ---
CO2
crc0Einfo
info

vESPrino v1.16 build20170103
IP address: 0.0.0.0
Chip ID: 2BDCF6
ready >
TEST
SI7021]
[crc40prop_list
prop_list]
[---vESPrinoCFG_start---
temp.adjustment=-0.4
cubic.co2.missing=missing
ds18b20.port=missing
send.interval=120
rf.enabled=true
rf.CO2=136
rf.TEMP=140
rf.HUM=141
rf.PRES=142
rf.PM25=137
rf.PM10=138
rf.GEN=-1
---vESPrinoCFG_end---
ready >
BME280]
[BMP085
Found BMP085 - Temperature/Pressure Sensor
PM2005
Found PM2005 - Dust / Particle Sensor]
[CDM7160
Found CDM7160 CO2 Sensor
DS18B20
TSL2561]
[BH1750]
[APDS9960]
[--- Setup DESTINATIONS ---
CustomHTTP
SerialDump
MQTT
RFX10]
[enabled]
[Blynk]
[Heap At setup end: 34832
------State changed to: 0
sendNowCond]
[--- DestHanlder: sendValue --- 1]
[Found BMP085 - Temperature/Pressure Sensor]
[Raw CO2: 701]
[CustomHTTPDest::process
SerialDumpDest::process
IP    : 0.0.0.0
CHIPID    : 2BDCF6
RUNTIME    : 5
TEMP    : 22.20
TEMPR    : 22.10
PRES    : 994.69
PM25    : 3
PM10    : 3
CO2    : 701
CO2R    : 701
MQTTDest::process]
[RFDest::process]
[ready >]