[SOLVED] CM1102Sensor not detected since Dec Firmware update

[baz123]

(02-03-2017, 08:13 PM)baz123 Wrote:

(02-03-2017, 07:20 PM)admin Wrote: i didn't test correctly
now i managed to reproduce it and fix it.. the problem was that i spent a few weeks optimizing the firmware to boot faster, but the CM1102 needs some time to boot, and in the first versions of the device, it's booting is controlled by the firmware, and needs ~2 seconds.
So i had removed this delay and on newer devices that are wired differently it works, but on the older it desn't
now if you update it should be working

It appears to find the sensor but now the MQTT does not work

Ah Ok fixed MQTT - my bad.

That seems to solve it.  Thanks.