[SOLVED] v.Air - CO2 Monitor not recognised (CM1106)

[vaanja]

Hi Vladimir,
after latest firmware update my v.Air CO2 monitor stopped working.
It looks like firmware is not able to recognize sensor.
I've done several factory resets, but no change.
My sensor details:

Chip ID1138269
Flash Chip ID1458400
IDE Flash Size4194304 bytes
Real Flash Size4194304 bytes
Soft AP IP192.168.4.1
Soft AP MAC5E:CF:7F:11:5E:5D
Station MAC5C:CF:7F:11:5E:5D

How can I solve this situation? Is latest firmware for all your products?

Code:

​

Code:

Searching for v.Air Trying : COM3

Trying : COM4

Trying : COM5

Trying : COM6

Trying : COM7

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . Searching for v.Air Trying : COM3

Trying : COM4

Trying : COM5

Trying : COM6

Trying : COM7

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . Searching for v.Air Trying : COM3

Trying : COM4

Trying : COM5

Trying : COM6

Trying : COM7

.  . [^E]
[@ÑVäèLJŒ]
[`N]
[:Kì]
. [vESPrino v1.16 build20170122]

vESPrino found on : COM5
[]
[No I2C Devices found
crc40prop_list
prop_list
---vESPrinoCFG_start---
stored.i2c=0xFFFFFFFFFFFFFFFF
cubic.co2.missing=missing
ds18b20.port=missing
has.sensors=none
---vESPrinoCFG_end---
ready >]
[crc61nop 0
nop 0
ready >]
[Expected Sensors: none found:
if the device configuration is changed, trigger a Factory Reset to update sensors]
[Device initialized.

---Sending data---
CustomHTTPDest::process
CustomHTTP : 32ms
SerialDumpDest::process
IP    : 0.0.0.0
CHIPID    : 115E5D
RUNTIME    : 1
GMTTIME    : 4294967295
RSSI    : 31
SerialDump : 125ms
MQTTDest::process
MQTT : 69ms
RFDest::process
RFX10 : 0ms
Blynk : 0ms
fupd
ready >]
[IP address: 192.168.1.87 in 3404 ms
GOT IP]
[wss_start


WebSockets Server started on wss://192.168.1.87:8266
Open http://config.vair-monitor.com to configure device online
ready >]
[[0] Disconnected!
nop 300
ready >]
[[1] Disconnected!
nop 300
ready >]
[[0] Connected from 192.168.1.61 url: /
info

vESPrino v1.16 build20170122
IP address: 192.168.1.87
Chip ID: 115E5D
ready >]
[nop 0
ready >]
[info

vESPrino v1.16 build20170122
IP address: 192.168.1.87
Chip ID: 115E5D
ready >
prop_list
---vESPrinoCFG_start---
stored.i2c=0xFFFFFFFFFFFFFFFF
cubic.co2.missing=missing
ds18b20.port=missing
has.sensors=none
---vESPrinoCFG_end---
ready >]
[nop 0
ready >]
[---Sending data---
CustomHTTPDest::process
CustomHTTP : 31ms
SerialDumpDest::process
IP    : 192.168.1.87
CHIPID    : 115E5D
RUNTIME    : 121
GMTTIME    : 66060001
RSSI    : -44
SerialDump : 131ms
MQTTDest::process]
[MQTT : 70ms
RFDest::process
RFX10 : 0ms
Blynk : 0ms]
[---Sending data---
CustomHTTPDest::process
CustomHTTP : 30ms
SerialDumpDest::process
IP    : 192.168.1.87
CHIPID    : 115E5D
RUNTIME    : 242
GMTTIME    : 66180262
RSSI    : -45
SerialDump : 131ms
MQTTDest::process]
[MQTT : 69ms
RFDest::process
RFX10 : 1ms
Blynk : 0ms]