[SOLVED] Disable wss - Printable Version +- vThings Forums (http://forum.vair-monitor.com) +-- Forum: vThings (http://forum.vair-monitor.com/forumdisplay.php?fid=1) +--- Forum: vAir Monitor (CO2, Dust, Tempereature, etc..) (http://forum.vair-monitor.com/forumdisplay.php?fid=2) +--- Thread: [SOLVED] Disable wss (/showthread.php?tid=56) |
[SOLVED] Disable wss - baz123 - 02-03-2017 Not withstanding that the new firmware is not yet recognizing my CM1102 sensor, I want to turn of all communication except what I explicitly allow. To that end I want to turn off WSS that appears to start. How do I do that? Will this stop any automatic OTA firmware updates as well? RE: Disable wss - admin - 02-03-2017 (02-03-2017, 12:36 PM)baz123 Wrote: Not withstanding that the new firmware is not yet recognizing my CM1102 sensor, I want to turn of all communication except what I explicitly allow. Currently it is not possible But i will be doing some modifications in the weekend and i will add an option to disable it. RE: Disable wss - admin - 02-19-2017 i finally managed to fix this some details are here http://forum.vair-monitor.com/showthread.php?tid=63 RE: [SOLVED] Disable wss - baz123 - 02-23-2017 Hi, (updated a few moments ago) I am still seeing wss_start WebSockets Server started on wss://192.168.7.204:8266 Open http://config.vair-monitor.com to configure device online Despite setting wss.autostart=false ws.autostart=false I'd also say the logic of the UI to turn these off is backward. If you usually have these set to come on by default, the option should be to disable it rather than enable it. Cheers RE: [SOLVED] Disable wss - admin - 02-23-2017 it is all a bit confusing and i need to clean it up a bit, just wanted to make sure that all works well for a week or so so i added new options that are on the first page - to disable Wss and Hostpot ) on the page where you configure wifi RE: [SOLVED] Disable wss - baz123 - 02-25-2017 It doesn't appear to disable wss. RE: [SOLVED] Disable wss - admin - 02-26-2017 did you ticked "Disable WiFi Configuration on Start" and then you need to restart afterwards, after starting - the WSS endpoint will not start |